SAMES KREMLIN Cyclomix Micro - Page 15

CONTROL UNIT :
SAMES KREMLIN
STAINS FRANCE
Name and address of the manufacturer
CE
European conformity
Tension
CYCLOMIX
TM
MICRO voltage
P air
Maximum air pressure
P prod
Maximum fluid pressure
Serie / Serial
Number given by SAMES KREMLIN. The two first numbers indicate the
manufacturing year.
Ref
CYCLOMIX
TM
MICRO part number
Phase
Single phase
Fréquence
50-60Hz / Mains frequency
Ampérage
Maximum current used
NE PAS DEBRANCHER
SOUS TENSION
DO NOT DISCONNECT
WHILE POWER ON
-
Environmental Indication
(refer to § 2 - Environment)
FLUID MODULE :
SAMES KREMLIN
STAINS FRANCE
Name and address of the manufacturer
CE
European conformity
P air : 6 bar / 87 psi
Maximum air pressure
P prod : 175 bar / 2536 psi
Maximum fluid pressure
NE PAS DEBRANCHER
SOUS TENSION
DO NOT DISCONNECT
WHILE POWER ON
-
Environmental Indication
(refer to § 2 - Environment)
Caution!
The CYCLOMIX
TM
MICRO mixing system must be installed outside the explosive area.
It must be installed in a safe area (non explosive area according to the ATEX directive).
The control unit must not be above the fluid module.
The control unit must be connected to a mains supply fitted with a ground.
The ground of the fluid module must be grounded.
SAMES KREMLIN Page 10 Manual : 573.191.112