SAMES KREMLIN Page 3 Manual : 573.186.112
3. ASSEMBLING
The modules are stacked together and secured by tie-rods suitable for the number of modules.
If required two wall mounting brackets (use screws Ø 6 mm) can be installed on both side of the
color changer.
It is compulsory to fit the solvent valve on the end module, on the opposite side of the fluid
outlet.
4. TECHNICAL FEATURES
Modula rand versatile.
Ease of maintenance (the valves can be removed without dismantling the fluid hoses). Designed
for fluid circulation.
Supplied with valve opening indicator.
Airspray
AIRMIX
120 bar
/ 1740 psi
AIRMIX GT
200 bar
/ 2900 psi
AIRMIX
200 bar
/ 2900 psi
(stainless
steel 316 L)
AIRMIX
200 bar
2900
psi
(stainless
steel 316 L
NPTF)
Maximum fluid pressure 8 bar
/ 116 psi
120 bar
/ 1740 psi
200 bar
/ 2900 psi
200 bar
/ 2900 psi
200 bar
/ 2900 psi
Central fluid passage
diameter
8 mm / 5/16" 6 mm / / 1/4" 6 mm / 1/4" 6 mm / 1/4" 6 mm / 1/4"
Air control fitting (ind. 5) For hose 2,7 x 4
Fluid inlet fitting (ind. 4) F 1/4" NPS F 1/4" NPTF
Fluid outlet fitting (ind. 6) F 1/4" NPS
Wetted parts Stainless steel
PTFE seals
Stainless steel
PTFE seals
Stainless steel
GT seals
Stainless steel
316L
PTFE seals
Stainless steel
316L NPTF
Joints en PTFE
& FFKM seals
1 end module (inlet)
2 intermediate module Refer to drawing next page
3 outlet flange
To Next Page
Loading...