EasyManua.ls Logo

samlexsolar SCC-30AB - Introduction & Features; PV System Battery Charging Challenges

samlexsolar SCC-30AB
48 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
24
4
INTRODUCTION & FEATURES
The SCC-30AB is a Series Type of PWM (Pulse Width Modulation) Charge Controller.
It is based on an advanced design using a microcontroller for digital accuracy and fully
automatic operation. It can be used for 12V or 24V systems for solar charging . The
PWM battery charging has been optimized for longer battery life. The unit is designed
for user-friendly operation. Please take the time to read this Owner’s Manual and
follow the instructions step by step to help you make full use of the charging system.
Features
Advanced microcontroller based, high performance design for digital accuracy
and fully automatic and intelligent operation
Dual voltage capability – can be used with 12 V / 24 V Solar Systems
30 A charging capacity – enables use of up to 360 W of 12 V or 720 Watts of 24 V
Solar Panels
Series Mode PWM (Pulse Width Modulation) charging design for low loss higher
efciency charging and longer battery life
4 Stages of charging for 100% return of capacity and long battery life – Bulk,
Absorption, Float and Equalization Stages
Choice of 8 sets of Absorption / Float / Equalization voltage settings to enable
complete and safe charging of a wide range of Lead Acid / Ni-Cd Batteries
Convenient 2 X 16 character LCD Display with backlight for display of operating
information and data. Additional LED indication for displaying the charging
stages
Optional remote Battery Temperature Sensor (BTS) for temperature
compensation to ensure improved charging of batteries that experience wider
temperature variations during the year
MOSFET based reverse current blocking for night-time battery discharge
prevention. This allows much lower losses as compared to Diode based blocking
Specially designed for RVs, boats and trucks – allows convenient and aesthetic
ush mounting on walls / panels
Industry leading warranty
Requirements of Battery Charging in PV Systems
Batteries in PV Systems are commonly subject to abusive conditions that are generally
due to:
Under charging due to low sun peak hours
Excessive charging in high sun peak hours
Inappropriate or ineffective charge control for the battery technology

Table of Contents