Samson 3310 - Warnings on the Device

EB 8222-1 EN 1-7
Safety instructions and measures
NOTICE
!
Risk of valve damage due to the use of unsuitable tools.
Certain tools are required to work on the valve.
Î Only use tools approved by SAMSON (uAB0100).
Risk of valve damage due to the use of unsuitable lubricants.
The lubricants to be used depend on the valve material. Unsuitable lubricants may cor-
rode and damage surfaces.
Î Only use lubricants approved by SAMSON (uAB0100).
Risk of the process medium being contaminated through the use of unsuitable
lubricants and/or contaminated tools and components.
Î If necessary, keep the valve and the tools used free from solvents and grease.
Î Make sure that only suitable lubricants are used.
1.4 Warnings on the device
Warning Meaning of the warning Location on the device
Warning against moving parts
There is a risk of injury to hands or ngers due to the
rotary motion of the segmented ball in the valve body
and the shaft. Hands or ngers could be crushed if
inserted into the valve body or yoke and energy from the
actuator (e.g. signal pressure or spring compression)
causes the valve shaft to move.
.