Samson 3310 - Removing the Valve from the Pipeline; Removing the Actuator from the Valve

11-2 EB 8222-1 EN
Removal
11.1 Removing the valve from
the pipeline
1. Support the valve to hold it in place
when separated from the pipeline (see
the 'Shipment and on-site transport' sec-
tion).
2. Unbolt the ange joint.
3. Remove the valve from the pipeline (see
the 'Shipment and on-site transport' sec-
tion).
11.2 Removing the actuator
from the valve
See associated actuator documentation.