Samson 3374 - Repairs; Returning the Actuator to SAMSON

EB 8331-3 EN 12-1
Repairs
12 Repairs
If the actuator does not function properly ac-
cordingtohowitwasoriginallysizedor
does not function at all, it is defective and
must be repaired or exchanged.
Risk of actuator damage due to incorrect
service or repair work.
Î Do not perform any repair work on your
own.
Î Contact SAMSON's After-sales Service
for repair work.
12.1 Returning the actuator to
SAMSON
Defective actuators can be returned to
SAMSON for repair.
Proceed as follows to return devices:
1. Remove the electric actuator from the
valve (see the 'Removal' section).
2. Continue as described on our website at
uwww.samsongroup.com>Service&
Support>After-salesService>Returning
goods .
NOTICE
!
NOTICE
!
Further information on returned devices and
how they are handled can be found at
uwww.samsongroup.com>Service&
Support>After-salesService.
Note