Samson 3730 - Page 11

EB 8384-1 EN 11
Attachment to the control valve – mounting parts and accessories
Table 4 Attachment to rotary actuators (VDI/VDE 3845 for all sizes of fixing level 2) see Figs. 7 and 8
Mounting
parts
With follower clamp
and coupling wheel
VDI/VDE 3845 for all sizes of fixing level 2
for Type 3278 Actuator with 160/320 cm
2
for Camflex II
1400-7448
1400-7614
1400-9120
Accessories
Connecting plate G ¼: 1400-7461 ¼ NPT: 1400-7462
or pressure gauge bracket (7) G ¼: 1400-7458 ¼ NPT: 1400-7459
Pressure gauge mounting kit (output/supply)
Stainless steel/Brass: 1400-6950
Stainless steel/Stainless steel: 1400-6951
Table 5 General accessories
Accessories
Pneumatic reversing amplifier for double-acting
actuators
G ¼
¼ NPT
1079-1118
1079-1119
Cable gland M20 x 1.5 Nickel-plated brass 1890-4875
Adapter M 20 x 1.5 to ½ NPT, aluminum 0310-2149
Cover plate with list of parameters
and operating instructions
German/English (standard)
English/Spanish
English/French
1990-7930
1990-8212
1990-8132
Table 3
Attachment to NAMUR ribs or control valves with rod-type yokes (rod diameter Ø 35 mm or smaller)
according to IEC 60534-6, see Fig. 5
Travel in mm Lever For actuators Order no.
7.5 S
Type 3271-5 Actuator with 60/120 cm
2
on Type 3510 Valve, see
Fig. 6
1400-7457
5 to 50
Without (lever
M on basic
model)
Actuators from other manufacturers and Type 3271 with 120 to
700 cm
2
1400-7454
14 to 100 L Actuators from other manufacturers and Type 3271 with 1400 cm
2
1400-7455
40 to 200 XL
Actuators from other manufacturers and Type 3271 with
1400/2800 cm
2
, 120 mm travel
1400-7456
30 or 60 L
Type 3271 Actuator with 1400 cm
2
(120 mm travel) and
Type 3271 Actuator with 2800 cm
2
(30 or 60 mm travel)
1400-7466
Mounting brackets for Emerson and Masoneilan linear actuators
In addition, a mounting kit acc. to IEC 60534-6 is required depending on the travel. See row above.
1400-6771
Accessories
Connecting plate G ¼: 1400-7461 ¼ NPT: 1400-7462
or pressure gauge bracket (7) G ¼: 1400-7458 ¼ NPT: 1400-7459
Pressure gauge mounting kit (output/supply)
St. steel/Brass: 1400-6950
St. steel/St. steel: 1400-6951