EB 8384-1 EN 13
Attachment to the control valve – mounting parts and accessories
Fig. 3 · Direct attachment – Signal pressure connection for Type 3277-5 Actuator with 120 cm
2
9
11
Supply 9
Output 38
5
6
4
7
6
10
10.1
3
2
1
15
6.1
1.1
1.2
14
8
1 Lever
1.1 Nut
1.2 Disk spring
2 Follower pin
3 Follower clamp
4 Screw plug
5 Stopper
6 Connecting plate
6.1 Seal rings
7 Pressure gauge bracket
8 Press. gauge mounting kit
9 Switchover plate f. actuator
10 Cover plate
10.1 Seal ring
11 Cover
14 Gasket
15 Formed seal
Note!
Always use the connecting plate (6)
included in the accessories to connect
supply and output.
Never screw threaded parts directly
into the housing.
Symbols
Actuator stem
extends
Attachment left Attachment right
Actuator stem
retracts
Switchover plate (9)
Signal pressure
input for right
attachment
Marking
Cut-out of cover
plate
Signal pressure
input for left
attachment
To Next Page
Loading...
