Samson Go Mic Mobile User Manual

Go Mic Mobile
18
Specifications
Go Mic Mobile Wireless System
Working Range 100’ (30m) line of sight
Working Frequency 2.406 ~ 2.478 GHz
Frequency Response 10 Hz – 22 KHz
Operating Temperature -10°C ~ +50°C
Firmware Version V1.0
Hardware Version V1.0
Signal To Noise 90 dB (A) mic at minimum gain
78 dB (A) mic at maximum gain
Accessories Micro USB to Lightning cable, Micro USB to
Micro USB cable, Micro USB to USB-C cable,
Mini-B USB to USB-A cable,
3.5mm audio cable, shoe mount adapter
GMM Receiver
Max. Analog Audio Output Level +6 dBu, =4.4 Vpp, =70 mW per side into 32Ω
USB Audio Sample Rate 48 kHz
USB Audio Support Windows, Mac OS, iOS, Android, Linux
Battery Life 7 – 13 hours depending on use
Power Internal rechargeable lithium-ion battery
Operating Voltage 5V DC 500mA
HXD2 Handheld Transmitter
Microphone Type Unidirectional
RF Power <10 mW EIRP
Power Requirements Two AA (LR6) alkaline batteries
Battery Life 20 hours
PXD2 Belt Pack Transmitter
Input Connector Mini-XLR (P3)
RF Power <10 mW EIRP
Power Requirements Two AA (LR6) alkaline batteries
Battery Life 20 hours
At Samson, we are continually improving our products, therefore specifications and
images are subject to change without notice.

Samson Go Mic Mobile Specifications

General

Type	Radio microphone
RF power	10 mW
Microphone frequency	10 - 22000 Hz
Control type	Buttons
Product color	Black
Operating temperature (T-T)	-10 - 50 °C
Device interface	-
Connectivity technology	Wireless
Maximum operating distance	30 m
Power source	Battery
Battery life (max)	20 h
Battery technology	Alkaline
Number of batteries supported	2
Number of products included	1 pc(s)