Samson Go Mic Mobile - Mounting to a Tripod

Go Mic Mobile
16
1. Affix the 1/4”-20 Mounting Arm to the Go Mic Mobile Receiver by first removing
the fixed Mounting Arm using the two Phillips head screws.
2. Attach the GMM to the tripod following the tripod mounting instructions.
3. If the tripod 1/4”-20 mounting stud is longer than 3/8”, use the include Thumb
Screw before mounting the Go Mic Mobile Receiver to the tripod.
4. Mount the smartphone to the Go Mic Mobile Receiver following the instructions
from the section titled “Mounting to a Smartphone”.
Mounting to a tripod