Samson SX1200 - Specifications

53
Specifications
SX1200 SX1800 SX2400 SX2800 SX3200
Rated Output Power
Stereo both channel driven
8 ohms 300 Watts 400 Watts 500 Watts 700 Watts 800 Watts
4 ohms 450 Watts 600 Watts 750 Watts 900 Watts 1100 Watts
Bridged mono
8 ohms 900 Watts 1200 Watts 1500 Watts 1800 Watts 2200 Watts
Signal to Noise Ratio (20Hz-20k) 102dB 102dB 104dB 104dB 104dB
Distortion(SMPTE-IM) 0.05% 0.01% 0.04% 0.04% 0.04%
Input sensitivity @8ohms 1.24V(4dBu) 1.24V(4dBu) 1.24V(4dBu) 1.24V(4dBu) 1.24V(4dBu)
Voltage Gain 32dB 33dB 34dB 35dB 35dB
Output Circuitry AB AB H H H
Current Consumption(115VAC)
@1/8 rated power 4ohms 6.3A 7.2A 7A 8.5A 8.5A
@1/3 rated power 4ohms 9.5A 12A 14.5A 17A 17A
@ rated power 4ohms, max. 15.5A 19.5A 26A 32A
Distortion(typical @4 ohms)
20Hz-20kHz,10dB below rated power 0.01% 0.01% 0.03% 0.03% 0.03%
IkHz,rated power 0.1% 0.1% 0.1% 0.1% 0.1%
Frequency Response @8ohms 1Watt 0/-0.5dB:20Hz-20kHz,0/-3dB:5Hz-60kHz
Damping Factor(400Hz) 280 280 350 350 350
Input Impedance 15kohm Unbalanced,30kohm Balanced
Input Clipping 10Vrms(22dBu)
Cooling Continuously variable speed, fan forced air
Connectors (each channel)
Input: Active balanced combo and1/4”(6.3mm)TRS
Output: 5-way Binding post and Speakons
Controls AC power switch,Channel 1 and 2 volume
Indicators Power on(blue),Protection(amber)
Signal(green) for each Ch.,Peak(red) for each Ch.
Protection Short circuit,Thermal,Current limit,DC offset,Current inrush,RF
protection, Turn on/Turn off muting
Power Requirements 100/115/220/230/240 VAC, 50/60 Hz
Dimensions(WXHXD) 19”(483mm)X3.5”(89mm)X16”(408mm)rack mounting to rear
support
Net Weight 33lb.(14.8kg) 37lb.(16,5kg) 40lb.(18kg) 47lb.(21.1kg) 48lb.(21.1kg)
Specifications are subject to change without notice.