Samsung 6100 Series - Connecting to Audio Devices; Using an Optical (Digital) Cable Connection and a Standard Stereo Cable Connection

Connecting
to
Audio Devices
Using an
Optical (Digital) Cable
Connection and a Standard
Stereo Cable
Connection
Use with
Digital
Audio Systems, Amplifiers, and Home Theaters.
Amplifier/
,
DVD
homeiheater
..._
A.;rJrc
Cable IN
QI
Su
p
pl
,
edl
--~
Red
Whole
~
AUDIO OUT: Connects
to
the audio input jacks on your
amplifieriDVD
home
theater.
•
When connecting, use the appropriate connector.
•
When you connect an audio
amp
lifi
er
to the
AUDIO
OUT
jacks, decrease the
volume
of
the TV and
adjust the
volume level
with the
amplifier's volume control.
~
DIGITAL AUDIO
OUT
(OPTICAL)
•
When you connect a
Digital
Audio System to the
DIGITAL AUDIO
OUT
(OPTICAL)
jack, decrease
the
volume
of
both the TV and the system.
•
5. 1
CH (channel)
audio
is
avai
lable
when you connect the TV
to
an
external
device supporting
5.1
CH.
•
When the receiver (or home theater)
is
set to on, you can hear sound output f
ro
m the TV
's
optical
jack
. When the TV
is
receiving a DTV
signal,
the TV
will
send 5.1
CH sound
to
the home theater
receiver. When the source is a
digital
component such as a DVD
player
I
Blu-ray player
I
cable
box
I
STB (Set-Top-Box)
satellite
re
ceiver and you connected it
to
the TV via
HDMI,
you will only
hear
2
CH audio from the home theater receiv
er.
If
you want
to
hear
5.1
CH audio, connect the
digital
audio
out
jack from your
DVD
I
Blu-ray player
I
cable
box
I
STB
satellite
receiver
directly
to
an
amplifier or home theater.