Channel
memorization stars.
Channel
memorization can take up to 45
rin~ai
<'H
i
!
n:;:
t,l!~'
ifl:
i
;;lti"-;·';
;
·
minutes, depending on your
cable
system.
If
You
Want
to
Rerun Setup ...
Menu--> System-->
Setup
For more information, refer
to
Auto Program
(Channel Menu
--.
Memorizing
Channels)
in
thee-Manual.
~
Select
Stop at any time
to
halt
the memorization process.
Select
Auto
or
Manual,
and then
select
Next.
~
If
you
selected I have a set-top box.
in
6 - Auto Program
(1),
you
can
only
set the current time and date manually, using your remote.
Auto
If you
selected
Auto, the
1V
will
automatically download
the correct time
from a
digital channel. The Time Zone screen
will
appear. Select
your
Time Zone, and then
select
Next. The
DST (Daylight
Savings Time)
screen
will
appea
r.
The
DST
function sets the time ahead one hour
to
adjust the clock
for
Daylight
Savings Time.
Select On
if you
want
to
turn
the DST adjustment on.
Select Off
to
turn off the DST adjustment. You
can also turn the DST function on through the
1V's
on screen menu
(Menu
--.
System
-->
Time
--. Clock --.
DST).
Manual
If
you
selected Manual, you'll
go
to
the
Clock
screen.
Select Date
or
Time.
You
can set the current date and time using your remote. When
done setting the Date and Time,
select
Next.
Review the Setup data, and then
select Close
to
fin
ish.
~
The
completed
settings are
displayed.
If
You
Want
to
Turn the Store Demo
Mode
On
or
Off.
To
set
or
unset Store Demo mode outside
of
Setup, press and release the
1V
Controller
wh
en the power
is on. The Function menu screen appears.
Push the
1V
Controller
to
the
left (to
MENU
(liD))
and
hold
for more than 5 seconds. The Store Demo mode is set.
To
cancel Store Demo, bring
up
the Function
menu using the
1V
Controller,
push the
Controller
to the right (to Source (
-EJ))
and hold for more than 5
seconds. See page 29 for information abo
ut
the
1V
Controller.
To Next Page
Loading...
