Samsung 6100 Series - Wireless Network Setup

1.
The
1V
searches for and then
displays
all
the
wireless
networks
within range. When done, it
displays
a
list
of
the networks.
In
the
list
of networks, move the
Highlight
to
select
a network, and then
select
Next. If
the
selected
network requires a Security
Key,
the Security
Key screen appears.
~
If
you have a
WPS(PBC) compatible
router,
select
WPS(PBC)
instead, and then
follow
the directions on the screen. When
done,
go
to Step
4.
2.
Enter your network security key
or
WPS
PIN
using your remote.
~
Enter numbers and letters
using your remote.
•
You can enter numbers by pressing the number buttons on
the remote.
•
To
enter a
letter,
move the
Highlight
to
the letter,
and then
select
it. You can enter numbers in the same fashion if you
choose.
~
To display capital letters
(or
redisplay small letters
if
capital letters
are
displayed), select
Caps
or
Shift.
~
To display symbols
and punctuation,
select*·
To redisplay
letters, select
* again.
3. When done,
select
Next if you have entered a security key or
WPS
PIN
if you have entered a
WPS PIN.
4.
The
1V
checks the
wireless
connection.
If
the connection is
successful,
the
You
are connected to
the
Internet. If
you have any
problems using
online
services,
please
contact your
Internet
Service Provider. message appears.
Select
Next, and then
go
to
4
Software Upgrade Step.
~
If
the connection fails, select Previous, repeat Step
1
and 2,
carefully
re
-enter your security key
or
WPS PIN,
then repeat
Steps 3 and
4.
If
it
fails
again,
select Next on
th
e "Connection
Failed"
screen, and then
go
to
6-
Auto Program
(1)
on the next
page. Configure your network
later
through
Network
Settings
in the TV's Menu. For more information, refer
to
"Setting
up
the
Wired
or
Wireless
Network"
in
the e-Manual
or
see the
Network
Connection sections in this
manual
(pages
15
and
31)
.
The
1V
checks the network connection, then
displays
the
You
are
connected to the
Internet. If
you have any
problems
using
online
services,
please
contact your
Internet Service Provider. message
appears.
Select
Next. The Software Upgrade screen appears.