Securing the TV to the
Wall
The TV-Holder Kit
(Sold
Separately):
Caution: Pulling,
pushing, or climbing
on the TV may cause the TV to fall.
In
particular, ensure your children do not
hang over or destabilize the
TV.
Doing
so may cause the TV to tip over, causing
serious injuries or death.
Follow all
safety
precautions provided
in
the
Safety
Flyer
included with your
TV.
For added stability
and safety, you can purchase and
install
the anti-fall device as described below.
The parts
below
are included
in
the
1V
Holder kit.
In
addition, you need
to
provide a wood screw, screw
and
molly,
or
other screw appropriate for the
wall
or cabinet you intend to secure th
e 1V-Holder string to.
We recommend a size
M4xl20
wood screw.
F\ }
. J
Installing
the
TV-Holder
1. Remove the screw attached
to
the back of your
1V,
and then connect the
1V
-Holder
to the
1V
with the
screw included
in
the 1V-Holder Kit that
is
designated for your
1V
.
~
Make sure to use only the appropriate supplied screw.
If
you use a different screw, you can
damage your
TV.
··
..
.
..
2. Firmly fasten the screw you provided (size
M4xl20
or similar) to the wall or cabinet where the
1V
is to
be insta
ll
ed.
~
If you fasten the screw to the
wall,
we
recommend you drive the screw into a stud.
If
that is
no
t
possible, use a
molly
to anchor the screw.
To Next Page
Loading...
