EasyManua.ls Logo

Samsung A50K8600A/A2 Series - 24 _ Troubleshooting

Samsung A50K8600A/A2 Series
31 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
24 _ Troubleshooting
Check Type Check Mode Causes Corrective Actions Description of Photo
Water Supply
Check
►4C
This may occur when the
water supply valve is
defective.
• Ifthewatersupplyvalveisbroken,replace
the valve.
• Checkifthewatersupplyisblockeddue
toanaliensubstanceinthevalveorcheck
if the water is supplied to the machine. If
aproblemisfound,taketheappropriate
countermeasure.
• Checkifthewatersupplyisblockeddueto
the water being frozen.
• IfthePBARelaymalfunctions,replacethe
PBA.
1. Measure the resistance of the
water supply valve.
- Resistance:0.9KΩto1.1KΩ
between the terminals of the
Water Supply Valve.
2. Checkwhetherthereisforeign
material in the Water supply
valvelter.
This may occur when the
main PCB is defective.
This may occur due to
frozen water.
DrainCheck ►5C
This may occur when the
drain pump is defective.
• Checkifthereisanyaliensubstanceinside
the draining pump motor.
• Checkthenaturaldraininthesamemanner.
• Checkifthereareanyincorrectconnections
orbrokenwires.
• Ifthemachinemalfunctionsintermittently
when the wash tub water temperature is
high,replacethepump.
• Ifthemotorstopsduetothewaterbeing
frozeninwinter,removethefrozenwater
referring to the relevant repair procedures.
Checkthedrainpumpresistance.
(Resistance:13.5~16.5Ω)
This may occur due to
frozen water.
Checkifthereisanyalien
substance inside the
draining pump.
This may occur when the
main PCB is defective.
Communication
Check
►AC
The signals between the sub
and main PBAs are not
sensed.
• Checkthewireconnectionsandterminal
contacts between the sub and main PBAs.
• Checkfordisconnectedwires.
• CheckwhetherthesubPBAisshort-circuited
because of moisture.
• IfthemainPBA’scommunicationcircuitis
faulty,replaceit.
-
Incorrect wire connections
between the sub and main
PBAs.
WA8700K Washer.indb 24 2016/2/4 16:56:14
This document can not be used without Samsung's authorization.
SAMSUNG PROPRIETARY. DO NOT COPY OR DISTRIBUTE WITHOUT PERMISSION

Related product manuals