Samsung A50K8600A/A2 Series - 26 _ Troubleshooting

26 _ Troubleshooting
Symptom Check Code Countermeasure Troubleshooting Procedure Measurement Picture
WaterLeakage Check
►LC LC1
This may occur when an alien substance is in the DV Case.
• Sincethisoccurswhenanaliensubstanceis
intheDrainingBellows,fornaturaldraining, remove the alien substance.
• Ifthedrainmotorisdefective,replacethe
motor.
• Checkifthewaterleaksfromthetub
connection part.
Checkifthereisanyalien substance in the Draining Bellows.
Checkifthereisanyalien substance such as underwear wire,coins,etc.
This may occur due to a defectoftheproduct’s internal hose or from the part assembly.
Unbalance Check
►UB
This may occur due to the laundry being unevenly distributed.
• Checkthelaundrytypeandcheckifthe
laundry load is unbalanced.
-Makesuretocheckifthereisanylaundry
present that absorbs a lot of water even if itsvolumeissmallandexplaintheproblem comprehensively,ifnecessary.
-
Mems PBA Detected
►8C ►8C1 ►8C2
This may occur due to disconnection. • Checkwireconnections.
-
This may occur when the Mems PBA is defective.
• ReplacetheMemsPBA. • ReplaceMemsPBAbecauseofthemain
PBAwiredisconnectionCheckorPBAsilver nano part malfunction.
OverowCheck ►OC
This may occur when the
water level sensor is defective.
This may occur when water
is supplied continuously due to freezing or foreign materials in the water supply valve.
• Thewaterlevelsensorisreplaced.
-
WA8700K Washer.indb 26 2016/2/4 16:56:14
This document can not be used without Samsung's authorization.
SAMSUNG PROPRIETARY. DO NOT COPY OR DISTRIBUTE WITHOUT PERMISSION