Samsung AC100RN4PKG User Manual

Troubleshooting
4-6 Samsung Electronics
Option No. : 02XXXX-1XXXXX-2XXXXX-3XXXXX
Option SEG1 SEG2 SEG3 SEG4 SEG5 SEG6
Explanation PAGE MODE
RESERVED
Use of external
temperature sensor
Use of central control
Compensation
of the fan RPM
Remote
Controller
Display
Indication
and Details
Indication Details Indication Details Indication Details Indication Details Indication Details
0 2
0 Disuse 0 Disuse 0 Disuse
1 Use 1 Use 1
High -
Ceiling
Mode
Option SEG7 SEG8 SEG9
SEG10 SEG11
SEG12
Explanation PAGE Use of drain pump
RESERVED
RESERVED RESERVED
Dew removal operation in
Wind-Free mode
Remote
Controller
Display
Indication
and Details
Indication Details Indication Details Indication Details
1
0 Disuse
0
Maintain
blade status
in Wind-
Free mode
1 Use
2
Use +
3minute
delay
1
(Default)
Cooling
Oper
ation
by Opening
the bla
1. Check whether power is supplied or not.
- When the indoor unit is not plugged in, there should be additional power supply in the indoor unit.
2. The panel(display ) should be connected to an indoor unit to receive option.
3. Set the installation option according to the installation condition of an air conditioner.
- The default setting of an indoor unit installation option is 02000-100000-200000-300000.
- Individual control of a remote controller(SEG20) is the function that controls an indoor unit individually when there is more than one
indoor unit.
4. Set the indoor unit option by wireless remote controller.
4-1-4 Setting an indoor unit installation option (Suitable for the condition of each installation
location)

Samsung AC100RN4PKG Specifications

General

Brand	Samsung
Model	AC100RN4PKG
Category	Air Conditioner
Language	English