Troubleshooting
Samsung Electronics 4-49
4-3-21 Smart install mode was not carried out (Error Code : E508 )
Smart install mode?
When installing the air conditioner the first time, the installation status and fault status and performance of the
product is a self-diagnostic function to determine comprehensively.
(The corresponding model is necessarily the general operation can be carried out when the smart install mode.)
Installation procedures of smart install mode
(1) Check the installation status of air conditioner.
refrigerant.
mode is displayed and the product will not run properly.
Model Indoor unit Outdoor unit
360 Cassette Red lights up E508
(2) Enter the smart install mode.
Model Indoor unit Outdoor unit
360 Cassette
It is blinking in sequence.
After lasting for 3 minutes
display.
(3) The installation smart install mode is complete.
blinking to show a success.
Indoor unit Outdoor unit
Indicator light of main unit switches off.
After blinking for 10 seconds.
It will enter the general operation stand by mode.
Smart Install Error.
To Next Page
Loading...
Need help?
General
