Troubleshooting
4-50 Samsung Electronics
Precautions
additionally according to the manual. At this time, it is possible to run the cooling test (K2 switch once) and
heating test (K1 switch once).
[E508 (Smart install mode was not carried out) error displayed.]
(Smart install mode was not carried out) error upon interruption.]
interrupted even by pressing the K1 or K2 switch.
pressing the K4 switch.
mode, the system will run the installation smart install mode again.
may be interrupted.
Please run the installation smart install mode again upon taking appropriate action for the error.
(Refer to troubleshooting)
unit will not work, displaying an error code of E508 (Smart install mode was not carried out).Upon resolving the
problem, try to complete running the installation smart install mode.
conditioner installation.
To Next Page
Loading...
