www.seconrenewables.com 0191 516 6553
info@seconrenewables.com
POWER SUPPLY
The Monobloc units require a single power supply.
5
*All Cable and Breaker sizes should be checked prior to Installation by a NICEIC accredited electrician.
*Communication Cable and Electrical supply should be kept separate (50mm or more).
The communication cable should be 0.75mm 2 core screened cable earthed at the outdoor unit.
The Internal MIM unit Requires a 20Amp Supply when the Tank Booster heater is connected and a
suitably sized cable 4mm²*
*All Cable and Breaker sizes should be checked prior to Installation by a NICEIC accredited electrician or
equivalent.
To Next Page