Samsung AM TNVD Series - WindFree Panel Cleaning; WindFree Panel Cleaning Steps; Panel Reattachment Caution

19
English
Installation Procedure
Option setting Status
19 Setting SEG23, SEG24 option
a Press Low Fan button
to enter SEG23 value.
b Press High Fan button
to enter SEG24 value.
Each time you press the button,
will be selected in rotation.
SEG23 SEG24
5 After setting option, press
button to check whether the option code you input is correct or not.
[SEG2, SEG3]
[SEG21, SEG22] [SEG23, SEG24]
[SEG4, SEG5] [SEG6, SEG8] [SEG9, SEG10] [SEG11, SEG12] [SEG14, SEG15] [SEG16, SEG17] [SEG18, SEG20]
6 Press the button with the direction of remote control for set. For the correct option setting, you must input the option
twice.
7 Check operation.
a Reset the indoor unit by pressing the RESET button of indoor unit or outdoor unit.
b Take the batteries out of the remote control and insert them again and then press the operation button.
DB68-08953A-00_IM_DVM QMD_EU_EN_.indd 19 2020-02-10 오후 4:23:11