Samsung AM072FXVAFH series - Page 11

Product Specications
Samsung Electronics 2-5
Changes in comparison to basic mode (cont.)
Changed
part
Changed item
and feature
Basic After changed
Main PCB
Change Main PCB
- Separation for load / control.
- Option resistance delete by model.
(standardization)
- When do PCB replace, need option
download.
Hub PCB
Hub PCB newly application
- Separation for load / control.
- Enhanced fixing of load / sensor wire.
FAN PCB
Use controller of 3 phase power
- Prevented phase unbalance.
- Temperature protection of IPM.
Inverter PCB
(Compressor
Control PCB)
Inverter PCB newly application
- Capacitor size increased
- EMI Coil applied
EMI PCB
EMI PCB newly application
- Coil size increased
- Fuse capacity changed
- Capacitor changed
Reactor
Reactor newly application.
- Terminal block for screw applied
-
PCB Cooling
Tube
Capacity of heat sink increased.
Tube size increased.
Communication
Terminal block
Did Communication Terminal block
mount to PCB.
Q AM168/192 6 XVAF 6 /AM096KXVAF 6