Samsung Electronics 8-3
Interface module for connection of terminal block
Do not connect power or communication wire.
Step Push button DisplayDescription Remark
Number of connections units
Step 1 Outdoor unit display
Needs to establish -
Step 2
At the same time, press the
2 seconds K1+K2
Prepared to setting on
Example)
03 : 1's Digit 3 times
64 : 10's Digit 6 times + 1's
Digit 4 times
Press K2 n times 10's Digit (0~6)
Press K4 n times
1's Digit (0~9)
Press the 2 seconds K4 : number of indoor units automatically senses.
Step 3 Press the 2 seconds K2, after save is ended (system reset)
㽞 AM038/048/055KXWD66
Outdoor unit option switch settings (cont.)
To Next Page
Loading...
