Samsung AM240MXVGNR/ET - Page 96

96
Setting outdoor unit option switch and key function
Setting outdoor unit option switches : B TYPE
 Setting outdoor install option
Step Button Display Description Note
Start
Outdoor unit address
ůЇɇϩϩцͱ˙ʒͱͱθЇϩϑ
Main unit?
No
No
Yes
Yes
Save
Heat recovery?
ůЇɇϩϩцͱ˙đAƸϑ
Outdoor unit address
Step1
Outdoor unit
display
Setting required -
Step2
Press (K1+K2)
for 2 seconds
Unit address
for module
combination
ߢߢࡑđɇЇϩ
K4 x 1 time
ߢߣࡑƊЇɵߣЇϩ
K4 x 2 times ߢߤࡑƊЇɵߤЇϩ
K4 x 3 times
ߢߥࡑƊЇɵߥЇϩ
Step3
If it is main unit, go to step4.
Otherwise, press K2 button for 2 seconds to save & exit
(system will be reset)
Quantity of indoor units
Step4 Press K1
Ready to set -
Step5
K2 x n times
X
Ɵʪϑʒ˝ϩ࣑ߢߨ࣒
kу࣒ߢߥࡑߥЇϩϑ
ߨߦࡑߨߦЇϩϑ
K4 x n times
X
Įʪϑʒ˝ϩ࣑ߢ
9)
ࡒçߦࡑťθʪϑϑ˙ͱθߤϑʪʀͱʒϑࣛɇЇϩͱɇϩʀʒʪϩʪʀϩͱͱ˙ʒͱͱθЇϩϑࣱ
quantity
Step6
If it is heat recovery model, go to step 7.
Otherwise, press K2 button for 2 seconds to save & exit
(system will be reset)
Quantity of MCUs * Heat recovery model only
Step7 Press K1
Ready to set -
Step8
K2 x n times
X
Ɵʪϑʒ˝ϩ࣑ߢߣ࣒
kу࣒ߢߥࡑߥЇϩϑ
ߣߨࡑߣߨЇϩϑ
K4 x n times
X
Įʪϑʒ˝ϩ࣑ߢ
9)
ࡒçߦࡑťθʪϑϑ˙ͱθߤϑʪʀͱʒϑࣛɇЇϩͱɇϩʀʒʪϩʪʀϩͱͱ˙đAƸϑ࢖αЇɇϩϩц
Step9 çߤࡑͱ˝
Save Restart
* Press K1 for 2 seconds to exit without save regardless of setting step.