Samsung AR09TXFYAWKNEU - 12-4 Cleaning and Filter Change

76
Auto clean function
Use the Auto clean function if the indoor unit produces odors.
Activating Auto clean
To activate Auto clean, press the (Options) button for at least 3 seconds.
The indoor unit display shows:
If the air conditioner is off, Auto clean starts immediately. If the air conditioner is running, Auto clean starts as soon as the
air conditioner turns off.
NOTE
• You can also activate Auto clean from the Options menu:
▶ ▶ Select Clean. ▶
• Once Auto clean is selected, it is always activated whenever the air conditioner turns off.
• Auto clean runs for 10 to up to 30 minutes depending on internal dry conditions. The indoor unit display shows the
cleaning progress from 1% to 99%.
• If you start another function while Auto clean is progressing, Auto clean pauses and will resume when the other function
stops.
• When Auto clean completes, the air conditioner turns off.
Canceling Auto clean
To cancel Auto clean while it is running, follow the procedure below:
▶ Press and hold for 3 or more seconds.
or
▶ ▶
Select
Clean.
▶
NOTE
• Canceling Auto clean does not deactivate it.
Deactivating Auto clean
To deactivate Auto clean, follow the procedure below while the air conditioner is in operation or turned off:
▶ ▶ Select Clean. ▶
12-4 Cleaning /Filter Change