using advanced functions
USING THE TURBO FUNCTION
Turbo function will be helpful to cool your room quickly and effectively by operating at the maximum fan
speed for 30 minutes.
1. Turn on the air conditioner.
Press the Power button on the remote control.
2. Set the operating mode.
Press the Turbo button on the remote control until
Turbo indicator appears on the remote control display.
The air conditioner operates in Auto fan speed and
automatically adjusts the temperature according to the
current room temperature. The unit operates for
30 minutes and then operates in last used mode, or in
Auto mode if Dry/Fan mode is most recent mode used.
Turbo function is only available in Auto/Cool mode. If Turbo function is selected in Dry/Fan
mode, operating mode changes to Auto.
To deactivate Turbo function
1. Press the Turbo button on the remote control while Turbo function is on.
The air conditioner operates in last used mode, or in Auto mode if Dry/Fan mode is most
recent mode used.
• While you are using the remote control, make sure corresponding indicator appears on
the remote control display.
• Temperature/Fan speed cannot be adjusted while using this function.
• Air flow can be adjusted manually (see page 18 for instructions).
• If you press the Mode button while the Turbo function is on, it will cancel the function.
To Next Page
Loading...
