How to fix Samsung BD-F6500 remote control not working?
If your Samsung Blu-ray Player remote control isn't working, first, try replacing the batteries. If that doesn't solve the problem, make sure you're operating the remote within 6.1 meters of the player. As a last resort, you can reset the remote by removing the batteries, holding down one or more buttons for several minutes, and then reinstalling the batteries.
Why is the screen blank on my Samsung BD-F6500 and how to fix it?
If the screen on your Samsung Blu-ray Player is blank, it could be due to the HDMI output resolution being too high for your TV. To resolve this, press and hold the '@' button on the top panel for more than 5 seconds without a disc inside to revert to factory settings. Keep in mind that this will erase all stored user BD data.
What to do if I forgot password on Samsung BD-F6500?
If you've forgotten your password for your Samsung Blu-ray Player, you can restore the factory settings by pressing and holding the '@' button on the top panel for more than 5 seconds without a disc inside. Be aware that this will erase all your stored user BD data. Use this method only when absolutely necessary.
Why is there no HDMI output from my Samsung BD-F6500 Blu-ray Player?
If you're not getting any HDMI output from your Samsung Blu-ray Player, begin by checking the connection between your TV and the player's HDMI jack. Also, verify that your TV supports the HDMI input resolution (576p/480p, 720p, 1080i, or 1080p).
Why does the video play intermittently on my Samsung Blu-ray Player?
If you're experiencing intermittent video playback on your Samsung Blu-ray Player, first ensure your network connection is stable. Check that the network cable is properly connected and that the network isn't overloaded. If you're using a wireless connection with an AllShare compatible device, verify the connection's stability.
What causes abnormal HDMI output screen on Samsung Blu-ray Player?
If you're getting abnormal HDMI output, such as random noise on the screen when using your Samsung Blu-ray Player, it likely means your TV doesn't support HDCP (High-bandwidth Digital Content Protection).
Why is there no audio from my Samsung Blu-ray Player?
If you're not getting any audio from your Samsung Blu-ray Player, check that you've selected the correct Digital Output in the Audio Options Menu.
What to do if Samsung BD-F6500 Blu-ray Player does not play disc?
If your Samsung Blu-ray Player isn't playing a disc, ensure the disc is installed correctly with the label side facing up. Also, check the region number of the Blu-ray Disc/DVD to ensure it's compatible.
Why is the picture noisy or distorted on my Samsung BD-F6500?
If the picture on your Samsung Blu-ray Player is noisy or distorted, make sure the disc is not dirty or scratched. If it is, clean the disc.
Why is the AllShare connection between my Samsung BD-F6500 and the PC unstable?
If the AllShare connection between your Samsung Blu-ray Player and your PC is unstable, it could be due to IP address interference. Ensure that IP addresses within the same subnetwork are unique. Also, check if you have a firewall enabled and, if so, disable it.
General safety warning about user-serviceable parts and shock risk.
Warning about electrical shock hazard and not opening the cover.
Warning about hazardous radiation from laser beam if not operated correctly.
Instructions to read and follow safety guidelines carefully for safe operation.
Classification of the player as a Class 1 Laser Product with specific cautions.
Cautions regarding liquid exposure, power plug accessibility, and socket overloading.
Important health and safety information for viewing 3D content.
Details on supported and unsupported disc types and file formats.
Detailed table of supported video file formats, codecs, and resolutions.
Important notes and considerations for connecting USB storage devices.
Identifies and explains the controls and ports on the front of the player.
Identifies and explains the ports on the rear of the player.
Detailed breakdown of each button's function on the remote control.
Step-by-step guide on how to connect the player to a TV using HDMI.
Instructions for connecting the player to an audio system via HDMI or Optical cable.
Guides on connecting the player to a network via wired or wireless connection.
Steps for setting up the player for the first time upon initial power-on.
Overview of the player's Home screen layout and its main functions.
Instructions on how to navigate to and open the player's Settings menu.
Explains which remote control buttons are used to navigate and operate the Settings menu.
Details on various display settings like 3D, Aspect Ratio, BD Wise, and Resolution.
Configuration options for digital audio output, downsampling, and dynamic range control.
Options for checking network status, configuring connections, and Wi-Fi Direct.
Settings for parental controls (BD/DVD) and changing the security PIN.
Information on checking and performing software updates.
Steps for automatic wired network setup.
Steps for manual wired network setup using static IP.
Steps for automatic wireless network setup.
Steps for manual wireless network setup using static IP.
Steps for connecting wirelessly using WPS Push Button Connect.
Steps for connecting wirelessly using WPS PIN method.
Connects Wi-Fi Direct devices without a router using peer-to-peer.
How to update the player's software for improvements.
Steps to manually update the player's software via network or USB.
How to set the player to automatically download and install software updates.
Introduction to the AllShare Play screen for accessing media.
Instructions for playing standard commercial Blu-ray/DVD discs.
Methods for playing media files from a USB device.
How to play discs with user-recorded multimedia files.
How to play media from a PC or compatible device wirelessly.
Steps to stream PC/device content via AllShare.
How to control PC media playback using a smartphone app.
General controls for video playback from various sources.
Explains remote buttons for video playback functions.
General| 3D | Yes |
|---|---|
| Depth | 196 mm |
| Width | 360 mm |
| Height | 40 mm |
| Weight | 1200 g |
| Display | LED |
| Product color | Black |
| Audio decoders | Dolby Digital, Dolby Digital Plus, Dolby TrueHD, DTS-HD, DTS-HD Master Audio |
| Package weight | 2000 g |
| Cables included | AC |
| AC input voltage | 100 - 240 V |
| Progressive scan | - |
| AC input frequency | 50 - 60 Hz |
| Disc types supported | BD, BD-R, CD, CD-R, CD-RW, DVD, DVD+R, DVD+RW, DVD-R, DVD-RW |
| Recording disc types | BD-R, CD, CD-R, CD-RW, DVD, DVD+R, DVD+RW, DVD-R, DVD-RW |
| Playback disc formats | Blu-Ray audio, Blu-Ray video, CD audio, CD video, VCD |
| Supported video modes | 1080i, 1080p, 480i, 480p, 576i, 576p, 720p |
| Card reader integrated | No |
| USB 2.0 ports quantity | 1 |
| Audio formats supported | AAC, LPCM, MP3, WMA |
| Video formats supported | AVCHD, DIVX, MKV, MPEG2, MPEG4, MPO, WMV |
| Number of products included | 1 pc(s) |
| Power consumption (standby) | 0.3 W |
| Power consumption (typical) | 17 W |
| Consumer Electronics Control (CEC) | Anynet+ |
| Audio output channels | 7.1 channels |
To Next Page
