EasyManua.ls Logo

Samsung DCS - CALL WAITING; SETTING UP A CONFERENCE

Samsung DCS
33 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
tone and then dial an extension number. Your call is automatically put
on transfer hold.
• Hang up when you hear a busy signal. The called party will be
alerted that a call is waiting.
TRANSFER RECALL
All calls that you have transferred (screened, unscreened and camped-
on) will automatically recall to your station if they are not answered in
a pre p r ogrammed period of time.
CALL WAITING
If an outside call has been camped-on to your phone or another station
is camped-on to you:
• You will receive a camp-on tone indicating another call is waiting.
• Hookflash and then dial 11to put the first call on hold.
• Hang up and the waiting call will ring.
• Lift the handset to answer.
• Complete this call by transferring it or hanging up.
• Lift the handset and then dial 11 to return to your first call.
SETTING UP A CONFERENCE
You may conference five parties (you and four other parties) in any
combination of outside lines and internal stations in any ord e r.
• While you are engaged in a conversation, hookflash, re c e i v e
transfer tone and dial 4 6 . You will receive conference tone.
• Make another call, either intercom or outside, and then recall and
receive conference tone.
• Make another call, either intercom or outside.
After the called party answers, hookflash and receive confere n c e
t o n e .
• Make another call – OR – hookflash to join all parties.
• Repeat as necessary.
11
SLT 99.1.20 3:28 PM ‰¿Ã¡ˆ14

Table of Contents

Other manuals for Samsung DCS

Related product manuals