ACCOUNT CODES
When it is equipped with optional equipment, your SAMSUNG DCS
system allow calls to be charged to diff e rent accounts. You can enter an
account code in two ways. To enter an account code by interrupting the
c o n v e r s a t i o n :
• While on an outside call, hookflash, receive confirmation tone
and dial 4 7.
• Dial the account code (it may be a maximum of 12 characters
including * and #).
• Hookflash to return to the conversation.
• If you make an erro r, repeat the pro c e d u r e with the correct code.
Only the last account code dialled will be re c o rd e d .
To enter an account code after the outside party hangs up.
• After outside party hangs up, hookflash, receive confirmation
tone and then dial 4 7.
• Dial the account code (it may be a maximum of 12 characters
including * and #) .
NOTE: If you wait for the outside party to hang up, you must complete
this pro c e d u r e within ten seconds. You cannot repeat if you
make a mistake.
IN/OUT OF GROUP
If your station is assigned to a hunt group, this feature will allow you to
dial 5 3 plus the group number, e.g., 5 0 1 , plus 0 to temporarily pre v e n t
your station from receiving any group calls. You will still be able to
receive calls that are dialled directly to your station. To reenter the gro u p ,
dial 5 3 pous the guoup number , e.g., 5 0 1 , plus 1.
DIAL BY VOICE
If your station is assigned to a Dial by Voice group, this feature allows
you to use Dial by Voice. Before using this feature, you must re c o rd a
22
SLT 99.1.20 3:29 PM ∆‰¿Ã¡ˆ25
To Next Page
Loading...
