USER ORIENTATION
Lifting the handset on your telephone will provide SAMSUNG DCS
dial tone. This is also re f e r r ed to as internal or intercom dial tone. To get
an outside line from the telephone company, dial an access code, usual-
ly the digit “0.” To call another station in your system, simply dial its
extension number. See your system directory list for other access codes
and extension numbers.
HOOKFLASH
T h r oughout this guide, you will see re f e r ences to “hookflash.” Ah o o k-
flash is a momentary operation of the hookswitch re q u i r ed for a feature
operation. Some telephones have a FLASH k e y. This key may be
p ressed instead of the hookswitch.
C.O. LINES
Lines from the telephone company are “C.O. lines.” Calls on these lines
a r e re f e r r ed to as “outside calls.” These C.O. lines are accessed by dial-
ing an access code. For example, dial 0 to get a local outside line or dial
80 – 89 for other line groups. Each line in the system is numbered begin-
ning with 701, and then 702, 703, etc. To get a specific line, dial its thre e
digit line number. If Least Cost Routing (LCR) is programmed into the
system, you will only be re q u i red to dial 0.
2
THINGS YOU SHOULD KNOW
SLT 99.1.20 3:28 PM ∆‰¿Ã¡ˆ5
To Next Page
Loading...
