5. Disassembly and Reassembly
Samsung Electronics
5-1
Stop operation of the air conditioner and remove the power cord before repairing the unit.
Indoor Unit
No. Part name Procedures Picture
!
@
Filter-pre
Ass’y-blower, DUCT
!
Disassemble two screws of indication part
and then assemble the direction of two
plate-handle places by use of screw as
shown in
@
.
@
Turn the plate handle by hand when
removing the filter-pre.
#
When pulling the filter-pre handle, the
filter-pre can be assembled.
❉ Be sure to remove the cushion on the
★ marked part after initial installation.
(It cause the damage of noise).
❉ Work is possible after disassembly of
no.
!
prefilter.
!
After disassembling nine places indicating
screws, separate Ass’y cover bottom.
Duct-ADH1800E-3 4/12/00 5:47 PM Page 5-1
To Next Page
Loading...
