32
Using the camera button to adjust the camera
The STILL IMAGE/MOVIE CLIP mode function can be set up by using the camera button.
POWER switch
Used for turning the camera power on / off.
The camera power will be turned off automatically during
periods of inactivity. This is done to reduce battery drain.
The camera can be reactivated by sliding the power switch
again.
SHUTTER button
Used for taking images for RECORDING
(STILL IMAGE/ MOVIE CLIP).
LCD button
Pressing the LCD button in the RECORDING
(STILL IMAGE, MOVIE CLIP) mode will change the display
as shown below.
image & full information
Pressing the
LCD button
Pressing the
LCD button
Pressing the
LCD button
image & basic information
LCD off
To Next Page
Loading...
