Samsung DIGIMAX 300 - Setting up the play back function by using the camera button; LCD button; MENU button

PLAY
47
Setting up the play back function by using the camera button
You can set up the PLAY mode function by using the camera buttons.
LCD button
Pressing the LCD button in the PLAY mode will change the display as shown below.
You can check the image information(image size, recording date, time, flash) in the [image &
basic information] display.
Ex ) SIZE : 2048x1536 Image size DATE : 2003/09/01 Recording date
TIME : 13:24:07 Time FLASH : FIRED FIRED
SIZE : Image size
DATE : Recording date
TIME : Time
FLASH : Using a flash
image & full information
image & basic information
Pressing the
LCD button
Pressing the
LCD button
MENU button
When you press the MENU button, a menu related to each camera mode will be displayed on
the LCD monitor. Pressing it again will return the LCD to the initial display.
Pressing the
MENU button
menu on menu off
PLAY
DELETE
SLIDE SHOW 2 SEC
PROTECT LOCK
# OF PRINTS X0
EXIT:MENU CHANGE: