Samsung DIGIMAX 300 - Starting the SETUP mode; Date setup

62
Starting the SETUP mode
The selection range for date/time setup covers from 2000~2099. (It is automatically
programmed to allow for a leap year/ month)
INFORMATION
If the batteries or AC adapter are removed, it is necessary to reset the time /date.
The Recording date is displayed on the LCD monitor in PLAY mode.
(DATE IMPRINT : ON)
NOTICE
You can change the imprinted date/time
1. Select the SETUP mode by rotating the mode dial.
2. [SETUP 1/2] menu will be displayed.
3. To shift menu cursor to [SETUP 2/2], press the
RIGHT( ) button.
4. Press the UP( )/ DOWN ( ) button and select
[DATE SETUP].
5. Press the SET( ) button and the sub menu will be
displayed. You can change the date/time on the
LCD monitor display by pressing the UP( )/
DOWN( )/ LEFT( )/ RIGHT( ) button.
- LEFT( )/ RIGHT( ) button : you can select
year/month/day,
hour/minute by
pressing these
buttons.
- UP( ) button : Increases the
number of items
- DOWN( ) button : Decreases the number of items
6. To confirm the setting, shift the cursor to [MINUTE] and press the SET( ) button.
SETUP 2/2
DATE SETUP
QUICK VIEW 1 SEC
LANGUAGE ENGLISH
RESET
CHANGE:
DATE SETUP
DATE 2003/09/01
TIME 20:05
EXIT:MENU SET:
Date setup