Samsung DIGIMAX 300 - Starting the SETUP mode; Date type

SETUP
61
Starting the SETUP mode
You can select the date type that is to be imprinted on the image.
- YYYY/MM/DD : year /month/ day
- MM/DD/YYYY : month/ day /year
- DD/MM/YYYY : day /month /year
1. Select the SETUP mode by rotating the mode dial.
2. [SETUP 1/2] menu will be displayed.
3. Press the UP(
)/ DOWN ( ) button and select
[DATE TYPE].
4. Press the SET( ) button and the sub menu will be
displayed.
5. Select your desired date type by pressing the
UP( )/ DOWN( ) button.
Press the SET( ) button to confirm the setting.
6. The default is [YYYY/MM/DD].
SETUP 1/2
DATE TYPE
YYYY/MM/DD
MM/DD/YYYY
DD/MM/YYYY
EXIT:MENU SET:
SETUP 1/2
BEEP ON
POWER OFF 10 MIN
DATE IMPRINT ON
DATE TYPE YMD
CHANGE:
Date type