Samsung DIGIMAX 300 - Setting up the play back function using the LCD monitor; Delete all

PLAY
53
Setting up the play back function using the LCD monitor
1. Rotate the mode dial to the PLAY mode and
press the MENU button.
2. Press the UP( )/ DOWN( ) button and select
[DELETE].
3. Press the SET( ) button and the sub menu will
be displayed.
4. Select [DELETE ALL] by pressing the
UP( )/DOWN( ) button and press the SET( )
button
5. Select [NO] or [YES] and press the SET( )
button.
[Selecting NO] : The image will be displayed
on the LCD monitor.
[Selecting YES] : A [Please wait!] message is
displayed and all of
unprotected images are
deleted.
(If there are no protected images, all of the stored images are deleted and a [NO IMAGE!]
message will display.)
Delete all
This enables you to clear all unprotected images from the memory.
Remember that this will permanently delete unprotected images. Important shots should be
stored on a computer before deletion takes place.
PLAY
DELETE
DELETE IMAGE
DELETE ALL
FORMAT
EXIT:MENU SET:
PLAY
DELETE
DELETE ALL
NO
YES
EXIT:MENU SET: