PLAY
55
Setting up the play back function using the LCD monitor
Images can be displayed continuously at pre-set intervals.
This is useful and convenient for checking recorded images and for presentations.
You can select the slide show play back time( between 1 and 9 sec)
1. Rotate the mode dial to the PLAY mode and
press the MENU button.
2. Press the UP( )/ DOWN ( ) button and select
[SLIDE SHOW].
3. Press the SET( ) button and the sub menu will
display.
4. Press the UP( )/ DOWN ( ) button and select
the desired slide show play back time. Press the
SET( ) button and the slide show will start.
5. To pause or restart the slide show, press the
SET( ) button.
6. If the slide show is finished, the last stored image
will be displayed.
PLAY
SLIDE SHOW
2 SEC
EXIT:MENU SET:
PLAY
DELETE
SLIDE SHOW 2 SEC
PROTECT UNLOCK
# OF PRINTS X1
EXIT:MENU CHANGE:
Slide show
To Next Page
Loading...
