26
Using the camera buttons to adjust the camera
The RECORDING mode function can be set up by using the camera buttons.
Used for turning the camera’s power on/ off.
To turn on the camera power, press the power button.
If there is no operation during the specified time,
the camera’s power will be turned off automatically to save
battery life.
Pressing the power button for over 3 seconds will deactivate
the start-up sound and sound function.
POWER button
Used for taking an image or recording voice in the
RECORDING mode.
In MOVIE CLIP mode :
Pressing the shutter button down fully starts the process for
recording a movie clip. Press the shutter button once and the
movie clip is recorded for as long as the available recording
time in the memory allows. If you wish to stop recording,
press the shutter button again.
In STILL IMAGE mode
Pressing the shutter button down halfway activates the auto focus and checks the condition
of the flash. Pressing the shutter button down fully takes the image and stores the relevant
data regarding the shot. If you select voice memo recording, the recording will start after the
camera has finished storing the image data.
SHUTTER button
ZOOM W/T button
If the menu is not displayed, this button works as the
OPTICAL ZOOM or DIGITAL ZOOM button.
To Next Page
Loading...
Need help?
General
