《10》
Connecting to a Power Source
■ How to charge the rechargeable battery (SLB-0837B)
Charging LED
■ You can charge the rechargeable battery (SLB-0837B) by using an SAC-45 KIT.
The SAC-45 consists of the AC adapter (SAC-45) and the USB cable (SUC-C2).
When the AC adapter and the USB cable are assembled, it can be used as an
AC cable.
● Using the SAC-45 as an AC charger
: Insert the AC adapter into the USB connector.
When the AC adapter is inserted, it can be used
as an AC charger.
● Using the SAC-45 as an USB cable
: Remove the AC adapter from the USB
connector. You can transmit data with a PC
(p.66) or charge the battery.
In the following cases, the battery may not be charged.
● When using the USB cable that was not supplied with this camera : Use the
supplied USB cable.
● When using the USB hub : Connect the camera to the PC directly.
● When other USB devices are connected to the PC : Disconnect the other
USB devices.
● When the USB is connected to the USB port located on the front of the
computer : Use the USB located on the back of the computer.
●
If the USB port of the PC doesn't meet the Power output standard (5V, 500mA),
the camera may not be charged.
CAUTION
To Next Page
Loading...
