Samsung DIGIMAX L70 - Setting Up the Application Software

《62》
Setting up the application software
■ To use this camera with a PC, install the application software first.
After this has been done, the stored images in the camera can be moved to the
PC and can be edited by an image editing program.
■ You can visit the Samsung web-site through the internet.
http://www.samsungcamera.com : English
http://www.samsungcamera.co.kr : Korean
1. The auto run frame will display.
Click the [Install] menu in the Auto
run frame.
2. Install the camera driver and DirectX by selecting a button shown on the
monitor. If an latest version of DirectX was installed on your computer, DirectX
may not be installed.
About the software
● Be sure to check the system requirements before installing the driver.
● To play back the movie taken with this camera on the computer, DirectX 9.0
must be installed.
● You should allow 5 - 10 seconds for running the automatic setup program
according to the capability of your computer. If the frame does not show, run
the [Windows Explorer] and select [Samsung.exe] in the CD-ROM Drive.
● PDF documents of user manual are included in the Software CD-ROM
supplied with this camera. Search the PDF files with Window's explorer.
Before opening the PDF files, you must install the Adobe Reader included
in the Software CD-ROM.
● To install the Adobe Reader 6.0.1 correctly, Internet Explorer 5.01 or later
had to be installed. Visit "www.microsoft.com" and upgrade the Internet
Explorer.
INFORMATION