Samsung DIGIMAX L70 - How to Select the Setup Menu; OSD Set

《50》
Setup menu
[OSD set]
■ You can check shooting (Recording mode) and displayed image (Play back
mode) information.
OSD set
OSD set
Date&Time
Imprint
Language
Full
Basic
Hide
LCD Save
OSD set
OSD set
Date&Time
Imprint
Language
Full
Basic
Hide
[Recording mode menu] [Play back mode menu]
[Full] : When the smart button is touched, the icons will be enlarged and
OSD will be displayed.
[Basic] : When the smart button is touched, the icons will be enlarged and
OSD will not be enlarged.
[Hide] : If the camera doesn't operate for about 3 seconds, all OSD will
disappear. When the shutter is pressed down or half way down,
the shutter speed and auto focus frame will display. OSD may
display by using the camera buttons except for the shutter button.
[LCD save] : If the camera is not used for about 30 seconds, the power and
camera status lamps blink and the LCD monitor turns off.
Set:MENU EXIT:M Set:MENU Exit:M
◀
◀
■ How to select the setup menu
1. Select the Setup mode.
2. Press each buttons that have different setup
menus.
3. To move the menu cursor, press the each
smart buttons as shown.
4. After selecting a menu, press the MENU
button to confirm the menu.
Press the M button and the menu will
disappear.
OSD set
OSD set
Date&Time
Imprint
Language
Full
Full
2006/08/01
OFF
ENGLISH
MODE
EXIT:M