《33》
PROGRAM
Metering
Effect
Effect
[PROGRAM mode]
[Special Effect mode]
■ If you cannot obtain suitable exposure conditions, you can change the metering
method to take brighter pictures.
- Mult : Exposure will be calculated based on
an average of the available light in the
image area. However, the calculation
will be biased towards the centre of
the image area. This is suitable for
general use.
- Spot : Only the rectangular area in the
centre of the LCD monitor will be
metered for light. This is suitable
when the subject in the centre is
exposed correctly, regardless of the back lighting.
※ If the subject is not the centre of the focus area, do not use the spot metering
as this may result in an exposure error. In this circumstance, it is better to use
exposure compensation.
Metering Special Effect
■ It is possible to add special effects to your images by using this button.
: You can add 8 types of frame-like borders to
a still image you want to capture.
: You can combine 2 ~ 4 different shots in a
still image.
: You can make the subject stand out from its
surroundings. The subject will be sharp and
in focus while making the rest out of focus.
To Next Page
Loading...
