Samsung DIGIMAX L70 - PictBridge Printing and Selection; Printing Images Directly; Setting Number of Copies

《47》
PictBridge
Set : MENU
※ If the [USB] menu is set to the [Computer], you cannot connect a Pictbridge compatible
printer to the camera through USB cable with [Connecting Computer] message. By
pressing the Printer button, at this point, you can connect the easy printing mode with
[Connecting Printer] message.
In some instances the camera may not connect to the printer, this will depend on the
make of the printer.
Print: MENU:OK
■ Easy printing
When you connect the camera to printer in the Play back
mode, you can print a picture easily.
- Pressing the printer( ) button : Currently displayed
image will be printed with the printer’s default setting.
- Pressing the Left / Right button : Selects a previous / next
image.
■ Printing Images
1. Press the Menu button and the PictBridge menu will
display.
2. Use the Up / Down buttons to select the [PRINT] menu.
And then press the Right button.
3. Use the Up and Down buttons to select a desired sub
menu and press the MENU button.
- [YES] : A confirmation window will display. Select the
[YES] menu and press the MENU button. The
image will be printed.
- [NO] : Printing will be cancelled.
NO
YES
PRINT
IMAGES
SIZE
Layout
Type
Set:MENU
Print?
Yes
No

PictBridge : Picture Selection
■ You can select images you want to print
● Setting the Number of Copies to Print
1. Press the Menu button and the PictBridge menu
will display.
2. Use the Left and Right buttons to select the
[IMAGES] menu.
3. Use the Up and Down buttons to select a desired
sub menu and press the MENU button.
- Select [One Pic] or [All Pics]. A screen where you
can set the number of copies to print will appear
as shown below.
- Press the Up/ Down button to select the number of prints.
- When [One Pic] is selected : Use the Left/ Right button to select another
picture. After selecting another picture, select
the number of prints for another picture.
- After setting the number of prints, press the OK button to save.
- Press the Shutter button to return to the menu without setting the number
of prints.
Exit:Shutter Set:MENU
[When [One Pic] is selected]
1 Prints
Exit:Shutter Set:MENU
1 Prints
[When [All Pics] is selected]
Set : MENU
One Pic
All Pics
PRINT
IMAGES
SIZE
Layout
Type
