《53》
[ Auto Focus lamp ]
■ You can turn the Auto Focus lamp on and off.
● Sub menus
[Off] : The AF lamp will not light up in a low light
condition.
[On] : The AF lamp will light up in a low light
condition.
Setup menu
[ Start up sound ]
■ You can select the sound that is activated whenever the camera is turned on.
[ Sound Volume ]
■ You can select the sound volume of start sound, operation sound and shutter
sound.
● [Sound] sub menus : [Off], [Low], [Medium], [High]
● Start up sound : [Off], [Sound 1], [Sound 2],
[Sound 3]
- If the start up image is set to [Off], the start up
sound will not activate, even though you may
have set these to on.
[ Operation Sound ]
■ If you set sound to ON, various sounds will be activated for camera startup,
when buttons are pressed, so that you can be aware of the camera operation
status.
● [Beep Sound] sub menus : [Off], [Sound 1],
[Sound 2], [Sound 3]
[ Quick view ]
■ If you enable Quick View before capturing an image, you can view the image
you just captured on the LCD monitor for the duration set in the [Quick View]
setup. Quick view is possible only with still images.
● Sub menus
[Off] : The quick view function can’t be
activated.
[0.5, 1, 3 sec] : The captured image is briefly
displayed during the selected time.
[ Shutter sound ]
■ You can select the shutter sound.
● Shutter sound : [Off], [Sound 1], [Sound 2],
[Sound 3]
File
Power off
LCD
Quick View
AF Lamp
Off
0.5 sec
1 sec
3 sec
Set:MENU Exit:M
◀
Sound Volume
Shutter Sound
Beep Sound
Start Sound
Start Image
Off
Low
Medium
High
Set:MENU Exit:M
◀
Sound Volume
Shutter Sound
Beep Sound
Start Sound
Start Image
Off
Sound 1
Sound 2
Sound 3
Set:MENU Exit:M
◀
Sound Volume
Shutter Sound
Beep Sound
Start Sound
Start Image
Off
Sound 1
Sound 2
Sound 3
Set:MENU Exit:M
◀
Sound Volume
Shutter Sound
Beep Sound
Start Sound
Start Image
Off
Sound 1
Sound 2
Sound 3
Set:MENU Exit:M
◀
File
Power off
LCD
Quick View
AF Lamp
Off
ON
Set:MENU Exit:M
◀
To Next Page
Loading...
