《27》
● Changing a part of composite shot before taking the last shot
Before taking the last composite shot, you can change a part of composite shot.
1. During the composite shots, press the button.
2. A previous image will be deleted and new frame will display. If there is an
image taken before, press the button again and a previous image will be
deleted again.
3. Press the shutter button to capture a new image.
[Moving backward to the 2nd shot]
Capture:SH Cancel:
Capture:SH Cancel:
Save:MENU Del.:
Pressing the button
● Changing a part of composite shot after taking the last shot
1. After taking the last shot, a menu will display
as shown.
2. Select an image to delete by using the Smart
button.
3. Press the button and the selected image
is deleted.
4. Press the Shutter button to take an image
again.
5. Press the MENU button and the image is saved.
Special Effect : Composite shooting Special Effect : Preset focus frames
● Moving and changing the focus frame
1. Press the button after selecting a preset focus
frame.
2. The colour of frame turns to white. Press the Smart
button to move the focus frame position.
3. Press the Shutter button to capture images.
[Range 1] [Range 2] [Range 3] [Range 4]
Capture:SH Edit:
■ You can make the subject stand out from its
surroundings. The subject will be sharp and in focus
while making the rest out of focus.
■ This menu can be selected only in the Special Effect
mode.
Capture:SH Move:
[Before taking the 3rd shot]
Capture:SH Edit:
Capture:SH Edit: Capture:SH Edit: Capture:SH Edit:
Edit:
To Next Page
Loading...
