《3》
ContentsCaution
●
System chart
5
●
Identification of features
6
■
Front & Top
6
■
Back & Bottom
7
■
Bottom
8
■
Self-timer lamp
8
■
Camera Status Lamp
8
●
Connecting to a Power Source
9
■SLB-0837B rechargeable battery
Specification
9
■How to charge the rechargeable
battery (SLB-0837B)
10
■
Charging LED of the AC Adapter
11
●
Inserting the memory card
11
●
Instructions on how to use the memory card
12
●
When Using the Camera for the First Time :
Smart button
13
●
LCD monitor indicator
14
●
Starting the recording mode
15
■How to use the AUTO mode
15
■
How to use the PROGRAM mode
15
■
How to use the Special Effect mode
16
■How to use the SCENE mode
16
■
How to use the MOVIE CLIP mode
16
■
To record a movie clip without voice
17
■Pausing while recording a movie clip
(Successive Recording)
17
■How to use the ASR (Advanced
Shake Reduction) mode
17
■
Things to Watch Out for When Taking
Pictures
18
●
Using the camera buttons to set the camera
19
■POWER button
19
■Shutter button
…
19
■
ZOOM W / T button
19
■
M (Mode) button
21
■
MENU button
21
■
Selecting focus type
22
■
Flash
22
■
Exposure compensation
23
■
White balance
24
■ISO
25
■
Shutter Speed / Aperture Value
25
■
Special Effect : Photo Frame
26
■
Special Effect : Composite shooting
26
■
Special Effect : Preset focus frames
27
●
Using the LCD monitor to adjust the
camera settings
28
■
How to use the menu
29
■
Size
29
■
Quality / Frame rate
30
CAUTION indicates a potentially hazardous situation which, if not avoided, may
result in a minor or moderate injury.
■ Leaking, overheating, or damaged battery could result in fire or injury.
•Use battery with the correct specification for the camera.
•Do not short circuit, heat or dispose of battery in fire.
•Do not insert the battery with the polarities reversed.
■ Remove the battery when not planning to use the camera for a long period of
time. Otherwise the battery may leak corrosive electrolyte and permanently
damage the camera’s components.
■ Do not fire the flash while it is in contact with hands or objects. Do not touch the
flash after using it continuously. It may cause burns.
■ Do not move the camera while it is switched on, if you are using the AC Charger.
After use, always switch off the camera before unplugging the cable from the
wall socket. Then make sure that any connector cords or cables to other devices
are disconnected before moving the camera. Failure to do so may damage the
cords or cables and cause a fire or electric shock.
■ Take care not to touch the lens or lens cover to avoid taking an unclear image
and possibly causing camera malfunction.
■ Avoid obstructing the lens or the flash when you capture an image.
■ Before inserting any cables or AC adapter, check the directions and do not insert
by force. It may cause breakage of cable or camera.
■ Credit cards may be demagnetized if left near case. Avoid leaving magnetic strip
cards near the case.
READY
RECORDING
To Next Page
Loading...
