《65》
Starting PC mode
■ Connecting the camera to a PC
■ Disconnecting the camera and PC : Refer to page 67
(Removing the removable disk).
※ If you selected [Printer] in the [USB] setup menu, when you connect the
camera to your printer, the [Connecting Printer] message will display and the
connection will not be established.In this case, disconnect the USB cable,
and then select the [Computer] menu of the [USB]. And then connect the
USB cable again.
■ Downloading stored images
You can download the still images stored on the camera to your PC's hard disk
and print them or use a photo editing software to edit them.
1. Connect the camera to your PC with the USB cable.
2. On your computer's desktop display, select
[My computer] and double click [Removable
Disk → DCIM → 100SSCAM].
The image files will then be displayed.
3. Select an image and press the right mouse
button.
4. A pop-up menu will open.
Click the [Cut] or [Copy] menu.
- [Cut] : cuts a selected file.
- [Copy] : copies files.
5. Click a folder where you want to paste the file.
● Before inserting any cables or AC adapter, check the directions and do not
insert by force. It may cause breakage of cable or camera.
INFORMATION
To Next Page
Loading...
