126
Automatic Network Settings (Wired)
How to set up automatically
1
Set Network type to Wired from the Network Settings page.
2
Press the ConnectNetwork Settings.
– The Connect
3
Wired network and Internet connection
completed.” message appears.
If the connection process fails, check the LAN port connection.
Manual Network Settings (Wired)
Offices may use static IP addresses.
Getting the Network Connection Values
1
2
In the pop-up menu that appears, click Status.
3
On the dialog that appears, click the Support
4
On the SupportDetails
displayed.
How to set up manually
1
Set Network type to Wired from the Network Settings page.
2
Press the ConnectNetwork Settings.
– The Connect
3
Stop. The
4
Select IP SettingsIP Settings screen appears.
5
Select the field at the top, press E, and then set IP Settings to Enter manually. Repeat
the entry process for each field in the IP Address.
Setting IP Settings to Enter manually automatically changes DNS Setting to Enter
manually.
6
OKE
7
Wired network and Internet connection
completed.” message appears.
To Next Page
Loading...
