Samsung DM65E-BC

153
Troubleshooting for Anynet+
Problem Possible Solution
  
 
 
 Anynet+ (HDMI-CEC) is set to On in the System menu.
 
 
 
your product off and on again.
 

 Anynet+ (HDMI-CEC) is set to
On in the System menu.
 Press the TOOLSAnynet+

 Select View PC in the Anynet+ menu.
 If using the remote control, press SOURCE

 
administrator menu. Select Source
from the administrator menu.
Disconnecting
Anynet+ device ...” appears on
the screen.
 
 
Anynet+.

play.
 